Accessories

This venting system is intended for use with the Cata-Dyne™ MKII model heaters to vent the by-products of a catalytic reaction (carbon dioxide and water vapour) outside the building where the heater is in use. Each assembly consists of an…
This venting system is intended for use with Cata-Dyne™ heaters to vent the by-products of a catalytic reaction (carbon dioxide and water vapour) outside the building where the heater is in use. Each assembly consists of an exhaust hood, a…
This unit is designed with a bulb and capillary assembly that automatically regulates the fuel flow to the Cata-Dyne™ heater. The sensing bulb is filled with temperature sensitive liquid, which responds to changes in temperature by expanding or contracting. This…
This thermocouple monitors the temperature of both the electrical start-up element and the underside of the catalyst pad inside a Cata-Dyne™ heater.
This safety shut-off valve works in conjunction with a thermocouple to monitor the catalytic reaction in the Cata-Dyne™ heater and ensure it is well established before the fuel supply remains on unattended. It is also designed to shut off the…
The multi-function valve works in conjunction with a thermocouple to monitor the catalytic reaction in the Cata-Dyne™ heater to ensure it is well established before the fuel supply remains on unattended. It is also designed to shut off the gas…
The safety shut-off valve works in conjunction with a thermocouple to monitor the catalytic reaction in the Cata-Dyne™ heater and ensure it is well established before the fuel supply remains on unattended. It is also designed to shut off the…
The Manual Shut-Off Ball Valve is designed for installation upstream of all auxiliary heater controls to shut off the main fuel supply to the Cata-Dyne™ heater if required. It is supplied standard for all CSA-approved Cata-Dyne™ heaters.
Protection grills affixed to Cata-Dyne™ heaters are installed to protect personnel and objects from coming into direct contact with the face of the heater. They are available in two styles: Strap-On and Snap-On. Strap-On grills are bolted to the heater…
This propane fitting adapter is used as a straight adapter to reduce a propane cylinder adapter to 1/4" NPT.
These steel mounting brackets are designed to mount Cata-Dyne™ heaters away from the wall, providing safe and easy access to the back of the heater. Brackets for the MKII model are half the length of the standard brackets, allowing installation…
This structure is designed for mounting Cata-Dyne™ heaters at floor level, allowing them to be placed closer to the objects being heated while providing added mounting flexibility over standard wall mount systems.
This unit uses a pressure gauge and PVC tube to accurately test and measure the gas pressure going into a Cata-Dyne™ heater. The tube end connects to the gas test port of the Safety Shut-Off Valve.
The Cata-Dyne™ line of Gas Pressure Regulators are designed to provide precise control of gas or propane flow, and are part of the piping system connected to the Cata-Dyne™ heaters. There are three types of regulators available, suitable for different…
Page 1 of 2